re: cd burner not detected in xp pro
Wednesday, January 15, 2003 at 9:00 pm
Windows XP Annoyances Discussion Forum
Posted by Casey
(571 messages posted)
Read the post , read the post again , then check your info before going off on
a tangent 7200E, E E E as in EXTERNAL parallel port burner.These have been around
since before all pc's had usb ports and they do have an XP driver even though they
were made for the initial release of Win95, this was the first truly popular consumer
burner (7200e and 7200i -internal - 2x2x4) and retailed for about $450 in '95. I
figure my 7200i burned about 1100 disks while i had it and is still alive in a friends
PC.
On Wednesday, January 15, 2003 at 10:43 am, knine wrote:
>Everything but your burner is working?????????? Do you mean that your burner is
>not detected? You do realize that a burner is detected just like a CD-ROM don't
>you? The CD-ROM should be master secondary IDE and the burner should be slave secondary
>IDE. This is done by setting the jumpers to master and slave on the CD-ROM and
the
>burner respectively. Why you are going into the bios setup and changing your LPT1
>setting is beyond me! I bet some einstein moron told you to do this. Use Roxio
>5 Basic for your burner software and go to the roxio web site for the XP update
or
>use Clone CD 4.2.0.2 (it's free).
>
>Lots of luck -- you will need it!
>
>
|
All messages in this thread [show all]
 |  |  | re: cd burner not detected in xp pro (Casey: Wed, Jan 15, 2003, 9:00 pm) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|
