|
|
|
re: Using Nero In-CD in Windows XP?'
Monday, March 10, 2003 at 12:45 pm
Windows XP Annoyances Discussion Forum
Posted by Bob Hablutzel
(1 messages posted)
I finally got Nero working right under WinXP (after three days). I did the following:
1) Uninstall all CD-writer software (Nero, EasyCD)
2) Delete the UpperFilter/LowerFilter registry entries (HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}\UpperFilter
and ...\LowerFilter.
3) Re-install Nero, and Nero WMP plug-in
4) This is the part that did the trick: Go to the device manager and uninstall your
CD-ROM drive. Then scan for hardware changes and let XP re-install it. This resets
the registry entries that allow "Send to CD" to work.
After doing this, I can use "Send to CD" and also Nero - actually both on the same
physical CD.
Good luck. It's definitely frustrating.
On Friday, December 27, 2002 at 9:08 pm, Michael wrote:
>I just received this from Ahead Tech support:
>
>Dear Customer,
>
>
>
>Please use the following troubleshooting tips.
>
>
>
> This is normally caused by driver conflicts. Please take
>the following steps:
>
>
>
>
>
>a) Upgrade to the latest InCD from our web site at www.nero.com/en/download.htm
>
>
>
>b) Go to your Windows Explorer or My Computer and right click on your Recorders
>drive letter, and then go to the "Recorder" Tab and in that window disable the option
>for "Enable Recording on this Drive".
>
>
>
>c) On some systems InCD will have trouble with Windows Media Player, because
>it uses an Adaptec driver that can conflict with InCD. To resolve this, go to your
>Control Panel's Add/Remove Programs feature and uninstall the Windows Media Player
>program. Then reinstall Windows Media Player, but without the Adaptec driver component.
>
>
>
>d) Make sure there are no programs running in the background before you try
>the format with InCD. And make sure to use Nero to do a FULL erase on the CDRW media
>before you format with InCD.
>
>
>
>e) Try with DMA enabled and disabled for your CD Recorder and CDROM/DVDROM
drives.
> To do this go to your Control Panel->Systems->Hardware->Device Manager and from
>there double-click on the IDE ATA/ATAPI Controllers. Right-click on the Primary
IDE
>Channel and go to Properties>Advanced Settings, and change Transfer Mode to "DMA
>if available". Do the same for the Secondary IDE Channel
>
>
>
>f) Disable the "PowerSave" feature for your computer before formatting. This
>may cause the recorder to disconnect during the format process, and thereby causing
>InCD to error out.
>
>
>
>g) If you are able to format the CDRW media, but after the format it fails
to
>mount, or mounts but will not allow you to write to the CDRW as it reports 0MB of
>space available on the CD, this is caused 90% of the time by old firmware for your
>recorder. Or the below drivers.
>
>
>
>Locate the below drivers and rename to .bac extensions and reboot...
>
>
>
> Cdudf_XP.sys
>
> Udfreadr_XP.sys
>
>
>
|
All messages in this thread [show all]
 |  | | | | | | | | | |  | re: Using Nero In-CD in Windows XP?' (Bob Hablutzel: Mon, Mar 10, 2003, 12:45 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|
|
|
