re: Network Cable Unplugged
Sunday, May 4, 2003 at 8:27 am
Windows XP Annoyances Discussion Forum
Posted by John
(2 messages posted)
I was getting "Network cable unplugged" between two desktop PCs, one with a built-in
NIC (on motherboard) and one with a LINKSYS NIC (PCI card slot). Problem was solved
by moving the LINKSYS NIC to a different PCI card slot and making sure it was fully
seated into the PCI slot. If you have a NIC in a PCI slot on one of the PCs in question,
I would suggest trying a different PCI slot if you have one available or if not,
simply removing the NIC card and re-installing it making sure that it is seated all
the way into the PCI slot. If you don't have a spare slot, you might try moving your
PCI cards around until you find a combination that works. Of course, this assumes
that your NIC software and driver(s) are installed correctly. Good Luck!
On Wednesday, April 30, 2003 at 5:07 pm, sandeep wrote:
>
>Hi
> Remove the nic physically from the system, restrat the system and boot without
the
>nic. Then trun off the system and reset the nic.
>
|
All messages in this thread [show all]
 |  | | | |  | re: Network Cable Unplugged (John: Sun, May 4, 2003, 8:27 am) |
| |
