re: irql not less or equal
Sunday, June 22, 2003 at 6:08 pm Windows XP Annoyances Discussion Forum
Posted by Josh
(1 messages posted)
I just began having this error message as of two days ago. I began searching for
answers on google, and founf most fourms to have resposes pointing in the direction
of failing or mismatched RAM.
I personally belive this is my culprit, But it was beginning to worry me as i have
a large amount of hardware connected to this computer. ie. 4 Hardrives of various
sizes. 4 optical drives including two burners, and one dvd, and cd rom. 2 networking
cards 1Video capture card. 1 dual output Video card VIVO capable. one IDE controller
card. 3 USB printers 2 monitors 1 Parallel scanner and 1GB of ram. This problem
only occured after mating one 512 double sided ram stick with one double sided 256
MB stick, and one single sided 256MB stick. Ht apperas that the additon of the mismatched
ram was the culprit as removing it removed the problem with it. I should also mention
that I'm running an AMD XP 2100 overclocked to 1.8GHZ and running my ram with fasted
write and latency settings availble in bios settings. After clocking everything back,
and reinstalling the problem did not return. I assume my problems was due to poorly
matched ram sticks, and an overclocked FSB, along with latency, and wait states et
to lowest possible.
Hope this helps anyone who might be running a similar sytem or overclocking thier
systems.
On Tuesday, November 5, 2002 at 4:26 am, jack wrote:
>I have the same problem , but it appears when the application running . If it because
>of hardware how coule I deal with it ?
- Written in response to:
- re: irql not less or equal (jack: Tuesday, November 5, 2002 at 4:26 am)
There are presently no replies to this message.
|
|
All messages in this thread [show all]
 |  |  | re: irql not less or equal (Josh: Sun, Jun 22, 2003, 6:08 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|