re: Mup.sys? Hangs but not? Wha's happening?
Thursday, June 26, 2003 at 3:39 pm Windows XP Annoyances Discussion Forum
Posted by Albert Lim
(3 messages posted)
WIth my previous post, I thought it might be useful to post some background information
for folks running into the same problem.
I was installing a PCI based professional Digital recording and mixing sound card
when this happened - M-Audio Delta 1010LT.
I was running my HDDs off a Maxtor ATA133 PCI controller card
GeForce 4 Ti 4200
AMD 2000+
MSI Ultra KT333 mobo
512 MB muskin DDR 333 (2 x 256MB slot 0 and 1 at first. I had to run them at slot
0 and 2 later to make the 2nd 256MB post)
NEtGear PCI 310 Ethernet
DVDROM and Burner running off onboard IDE (one per channel)
Everything works well now. I am so glad i did not have to do a low level format.
I retained all my settings and OS.
Thanks again to all the posters here. I was searching MS support site and could not
find anything useful there with regards to this problem. It is forums like these
that gave us folks some hope. Thanks a million.
On Thursday, June 26, 2003 at 3:08 pm, Albert Lim wrote:
>I just ran thru the same problem. But mine's worse. When i try to boot up using
the
>win2k setup CDROM it would also hang.
>
>Finally i managed to get Windows to startup by removing all my PCI cards, moving
>my boot drive from my IDE controller to the on board IDE controller, and moving
one
>of my 256 DDR RAM to the next slot.
>I removed all the hardware listings (under hidden) and reinstalled each PCI one
by
>one. Now it works. Thanks guys for your posts to help me get started. I have been
>so stressed out and irritated by this MUP.SYS issue.
>
>
|
All messages in this thread [show all]
 |  |  |  |  | re: Mup.sys? Hangs but not? Wha's happening? (Albert Lim: Thu, Jun 26, 2003, 3:39 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|