|
|
|
re: Network Cable Unplugged
Sunday, October 5, 2003 at 5:57 pm Windows XP Annoyances Discussion Forum
Posted by Joe
(2 messages posted)
I have been having same tbles and thru searches of google to different sites like
this one, I chose to change my uplink cat-5 crossover cable, from linksys router
to netgear router, with a different one crossover. It appears to have solved this
issue. I haven't gotten error message. My one cable removed was a defective one.
Five Pc's in system were getting message, so I was able to isolate with one it was
cuzz it happen in both router internets. Thanks all for messages and responses which
led me in the right direction to fix my "network cables is unplugged" ... It was
driving me crazy,,,lol
On Saturday, March 1, 2003 at 10:12 am, Robin wrote:
>I have a question about Connect
>to a Windows XP or 2000 system with a Windows 95, 98, or Me system over a Network:
>(Reposting this with a corrected subject)
>We just bought a new computer with an A7N266-VM mother board and installed windows
>XP. We tried to setup a
> network to a computer running windows 95 (didn't work) and
>a laptop running windows ME (didn't work). As far as we
> can tell devices are enabled, internet cable is good and is
>connected properly, ethernet driver is installed. However, on
> the network connection information, we get a message saying
>the cable is unplugged. Any help would be
> appreciated.
>
- Written in response to:
- Network Cable Unplugged (Robin: Saturday, March 1, 2003 at 10:12 am)
Responses to this message:
|
|
All messages in this thread [show all]
 |  | re: Network Cable Unplugged (Joe: Sun, Oct 5, 2003, 5:57 pm) |
| |
| |