|
|
|
re: Wake-On-Lan.... whats the beef!
Monday, October 13, 2003 at 1:00 pm Windows XP Annoyances Discussion Forum
Posted by caperj
(1 messages posted)
In order for it to work you myst fwd a port on your linksys UDP only to xxx.xxx.xxx.255
because your machine does not have an IP when in standby. This works in mt scenario
I have port 32767 UDP port fwd to 192.168.1.255 on magic packets I put the MAC the
ip with a subnet of 255.255.255.255 this sends it directly to you machine and voila
its on.
James
On Wednesday, December 11, 2002 at 12:43 am, Chad wrote:
>Ok... i'm recieving mixed messages about Wake On Lan.
>
>For instance, is thie tech ACTUALLY capable of powering up a machine or JUST waking
>it up from standby?
>
>I have a WinXP box here behind a linksys router. The NIC is the 905c-tx-m from
3Com.
>
>- I have enabled a few settings within the WinXP NIC settigs for my 3com card
to
>allow the device to wake the PC up.
>- I have also "enabled" a few other settings within the NIC settings.
>- Next I opened the 2304 UDP port on the router to forward to my static local
IP
>address of the WinXP box.
> - I have tested the setup with the AMD MagicPacket software, (I am using
the
>router's external IP and my WinXP MAC address as the info for MagicPacket).
>
>STILL NO GO! Any ideas? I have checked the BIOS and it's set properly.
>
>Help please.
|
All messages in this thread [show all]
 |  |  | re: Wake-On-Lan.... whats the beef! (caperj: Mon, Oct 13, 2003, 1:00 pm) |
| |
| |
Return to the Windows XP Discussion Forum
|
|
|
|