re: Network Cable Unplugged
Monday, December 15, 2003 at 7:17 pm Windows XP Annoyances Discussion Forum
Posted by Jay Chandler
(1 messages posted)
Hi, Here is an idea. Stop the "WINS Client" - Service
Control Panel > Administrative Tools > Services > Wins Client > "Stop"
Then Right Click Switch to Manual.
I have a DSL carrier that if I have the WINS CLient running (Which XP loads by default)
it will cause the Network Cable Unplugged error to flash in and out.
This should work like a miracle cure. Stop the service and it all works. Start the
service and it starts to error.
Good luck. ~Jay
On Saturday, March 1, 2003 at 10:12 am, Robin wrote:
>I have a question about Connect
>to a Windows XP or 2000 system with a Windows 95, 98, or Me system over a Network:
>(Reposting this with a corrected subject)
>We just bought a new computer with an A7N266-VM mother board and installed windows
>XP. We tried to setup a
> network to a computer running windows 95 (didn't work) and
>a laptop running windows ME (didn't work). As far as we
> can tell devices are enabled, internet cable is good and is
>connected properly, ethernet driver is installed. However, on
> the network connection information, we get a message saying
>the cable is unplugged. Any help would be
> appreciated.
>
- Written in response to:
- Network Cable Unplugged (Robin: Saturday, March 1, 2003 at 10:12 am)
Responses to this message:
|
|
All messages in this thread [show all]
 |  | re: Network Cable Unplugged (Jay Chandler: Mon, Dec 15, 2003, 7:17 pm) |
| |