re: i refilled my lexmark z42 printer and now the start light is flashing Sunday, January 11, 2004 at 12:28 am Windows XP Annoyances Discussion Forum Posted by clearice01 (21 messages posted) i dont know about the factory setting i will look around for a reset i have tryed to hold the start button down and hit the feed but nothing.i also have tryed the cartrige replacment procedure the only time the light stops flashing is when i take the cartriges out i also tryed to put one in at a time but the light starts again.when the light is flashing i can do eny thing at all so no i didnt do eny print head cleaning.thanks for your reply.. On Sunday, January 11, 2004 at 12:16 am, mojoe wrote: >Does the printer have a way to reset it to factory default settings like holding >down the reset or load/eject button while turning on the power switch? Have you tried >to repeat the cartridge replacement procedure and just lift the cartridge out slightly >and then immediately reseat it to see if it clears the error. I had to do that on >an Epson prntr recently to clear the 'out of ink' LED. Also, did you try several >print head cleaning cycles in the printer properties maintenance wizard? > >hth > > Written in response to: re: i refilled my lexmark z42 printer and now the start light is flashing (mojoe: Sunday, January 11, 2004 at 12:16 am) Responses to this message: re: i refilled my lexmark z42 printer and now the start light is flashing (mojoe: Sunday, January 11, 2004 at 12:51 am) All messages in this thread [show all] i refilled my lexmark z42 printer and now the start light is flashing (clearice01: Sat, Jan 10, 2004, 8:50 pm) re: i refilled my lexmark z42 printer and now the start light is flashing (Pappy: Sat, Jan 10, 2004, 9:09 pm) re: i refilled my lexmark z42 printer and now the start light is flashing (clearice01: Sat, Jan 10, 2004, 9:33 pm) re: i refilled my lexmark z42 printer and now the start light is flashing (mojoe: Sun, Jan 11, 2004, 12:16 am) re: i refilled my lexmark z42 printer and now the start light is flashing (clearice01: Sun, Jan 11, 2004, 12:28 am) re: i refilled my lexmark z42 printer and now the start light is flashing (mojoe: Sun, Jan 11, 2004, 12:51 am) re: i refilled my lexmark z42 printer and now the start light is flashing (clearice01: Sun, Jan 11, 2004, 12:59 am) re: i refilled my lexmark z42 printer and now the start light is flashing (Brenda: Tue, Feb 28, 2006, 8:24 pm) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows XP Discussion Forum