re: Mup.sys? Hangs but not? Wha's happening?
Saturday, January 17, 2004 at 7:16 pm Windows XP Annoyances Discussion Forum
Posted by AJ
(1 messages posted)
I was having a similar problem in win2000. Keyboard worked fine in BIOS setup, stopped
working once win2000 fired up. Couldn't get into safemode, etc. I read an article
at MS win2000 tech site. In short, the problem was the driver Iomega Zip software/driver
i loaded was too old.
The solution given is to go into the Recovery Console and disable IMGATAPI then enable
ATAPI SERVICE_BOOT_START. The additional problem in my case is that the Console
is not loaded and I don't have the install disks so I can load it/use it (and I don't
have floppy recovery disks either).
But I thought I'd post this anyway in case it helps someone; the problem for some
folks may be an old atapi or USB device driver, etc.
On Thursday, January 15, 2004 at 8:31 pm, Jeff wrote:
>My PC hung at mup.sys in Safe Mode after disabling ACPI in the power management
section
>of the BIOS. I Was able to boot normally after re-enabing it.
|
All messages in this thread [show all]
 |  |  | re: Mup.sys? Hangs but not? Wha's happening? (AJ: Sat, Jan 17, 2004, 7:16 pm) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|