re: Network Cable Unplugged
Thursday, January 22, 2004 at 4:02 pm
Windows XP Annoyances Discussion Forum
Posted by Maxicomm
(2 messages posted)
Hi,
Did u check out my message for 11/12/03 ... maxicomm ??? ... sounds like it might
just be a fix 4 u ?!?!?!
JD
On Monday, January 19, 2004 at 5:52 pm, jxdesign wrote:
>
>Still no solution to this problem...
>
>This is on a Dell Latitude CPx 650/XP Home with a xircom cardbus ethernet 10/100+modem
>RBEM56G-100
>
>I have connected my desktop and laptop together on a ethernet network, cat5e cable
>(not crossover) from ethernet port on desktop to port 1 on a Gigafast switch. Cat
>5e cable from port 2 on Gigafast switch to Xircom cardbus 100+modem 56 PCMCIA card
>in my laptop. Laptop generates "network cable unplugged message" and has a red "x"
>through the LAN. Desktop LAN appears to be fully functional. Port 1 shows link light,
>port 2 shows nothing.
>Solutions tried;
>Tried switching cables
>switching cable direction
>reseating Xircom card
>uninstalling/reinstalling Xircom card
>switching ports on switch
>replacing switch with D-Link Router
>updating to Xircom's final release of drivers for this product
>adjusted driver properties page, by choosing the configure tab, and setting the
duplex
>and speed (reset after that failed)
>disabled ics (re-enabled after that failed)
>Modem is fully functional on this card but LAN simply distributes "network cable
>unplugged message"
>
>Have I tried it all??? Can I rule the card bad?
>Thanks for any input
>
>
- Written in response to:
- re: Network Cable Unplugged (rich thomas: Monday, January 19, 2004 at 5:52 pm)
There are presently no replies to this message.
|
|
All messages in this thread [show all]
 |  | | | | |  | re: Network Cable Unplugged (Maxicomm: Thu, Jan 22, 2004, 4:02 pm) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|
