re: Mup.sys? Hangs but not? Wha's happening?
Saturday, February 21, 2004 at 2:00 pm Windows XP Annoyances Discussion Forum
Posted by Patrick
(2 messages posted)
I fixed my mup.sys problem back on friday 13th and my system is still extremely stable.
I also have a amd system and STILL beleive the issue is the amount of power your
systems bios is sending at core voltage.. with everyone drawing power via usb/video
these days the bios default settings isn't enough.I upped mine in small increments
and now it is happily pushing a usb Webcam/mouse/Steering wheel/voice commander/joystick
+ gf4 happily.
hth.
On Saturday, February 21, 2004 at 9:19 am, Stephane wrote:
>I'm having tis probleme too, but i think mine is a bit more seveer. I've tryed booting
>with windows cd that's based on winNT technologie and they all hand at the setup
>is starting windows part. I then tryed to install other types of OS ie. winME..
had
>no hang what so ever did all the updates and everything was running fine. Then I
>tryed doing an upgrade installation with no succes, then i had one of my freinds
>come over with his computer and swaped my harddrive in his to install windows XP,
>did have any problemes. Again I did all the updates and then swaped it back into
>my system, still hanged. After that I swaped the video card for his and ram and
disconnected
>everythin but the hard drive and in the bios i disabled enything that wasn't needed
>to boot and it still didn't work. I've read every post and tried all of the solutions
>that were posted and they didn't help at all.
>
>I dont have any USB device but my mouse. here's my system's specs:
>
>Athlon XP 1800+
>asus A7N8X-E Delux
>256MB samsung ddr333
>256MB samsung ddr333
>512MB samsung ddr333
>maxtor 120GB sata drive
>maxtor 60GB ata133 drive
>Radeon 9500pro
>LG dvd drive
>LG burner
>sony 3 1/2 floppy drive
>Enermax 431W psu
>
>It's not a hardware probleme since it wroks fine in winME. I tried ot install win2000,
>win2000 server, winXP pro, winXP pro french and win2003 server with no luck. I flashed
>my bios with evey existing version of my bios and it still hangs. I tried booting
>with no hard drive with the cd's only, got the same results. Any responce would
be
>a big help, thanks
>
>Stéphane
|
All messages in this thread [show all]
 |  |  | re: Mup.sys? Hangs but not? Wha's happening? (Patrick: Sat, Feb 21, 2004, 2:00 pm) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|