re: Mup.sys? Hangs but not? Wha's happening?
Sunday, February 22, 2004 at 8:14 am Windows XP Annoyances Discussion Forum
Posted by Stephane
(2 messages posted)
I dont beleave it to be the core voltage if there wasn't enough power the computer
would just shut down not cause probleme loading Mup.sys it could freeze at the loading
by chance but not every time. As for usb drawing power I dont have any usb devices
connected and usualy only have my mouse and gamepad(disconnected them for now). For
the cpu core voltage it should not be increased for nothing you should let it run
a stock settings if your not overclocking it was designed to run with that setting
and should not cause any probleme, however if it does crash because of you core voltage
it probably because of you power suply not being able to supply a steady steam of
current to you cpu.
Stephane
ps. I still tried uping the core voltage but it didn't change anything.
On Saturday, February 21, 2004 at 2:00 pm, Patrick wrote:
>I fixed my mup.sys problem back on friday 13th and my system is still extremely
stable.
>I also have a amd system and STILL beleive the issue is the amount of power your
>systems bios is sending at core voltage.. with everyone drawing power via usb/video
>these days the bios default settings isn't enough.I upped mine in small increments
>and now it is happily pushing a usb Webcam/mouse/Steering wheel/voice commander/joystick
>+ gf4 happily.
>
>hth.
>
>
>
|
All messages in this thread [show all]
 |  |  |  | re: Mup.sys? Hangs but not? Wha's happening? (Stephane: Sun, Feb 22, 2004, 8:14 am) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|