re: Mup.sys? Hangs but not? Wha's happening?
Thursday, April 22, 2004 at 9:34 am Windows XP Annoyances Discussion Forum
Posted by Scott
(1 messages posted)
Hello,
This user I have has SIIG SCSI hard drive and adapter
installed. Heres the problem:
I have installed Windows 2000 Pro onto a Dell PC.
After I install, it hangs @ the Splash screen for
Windows 2000. Eventually I get the following error:
"Stop:0x000000A(0X0000028, 0X00000002, 0X00000000,
0X8044A9E7)
***Address 8044A9E7 base at 804,0000***...", then it
eventually restarts the PC.
Things I have already tried:
1. Removed all devices except the required SCIS
hardware & Video Card.
2. Tried booting up in Safe mode, it hangs @ Mup.Sys.
I am going to try disabling Mup.sys next. Do you
know how to get it in DOS Mode to do that?
3. Tried disabling all cache & shadowing in the
system Bios. Also tried every boot sequence possible.
4. Tried every option in "Advanced Startup" possible.
Is there a setting in the SCSI Bios that I need to
change?
Is there any trick to installing Windows 2000 Pro onto
a SCSI Drive?
Any Help you can provide will be greatly appreciated.
Sincerely,
Scott
On Wednesday, March 12, 2003 at 9:12 pm, Brian wrote:
>If you have read any of my problems, (computer hangs all of the time) then you should
>know all about the problem. I booted it today, (still not fixed) into safe mode.
>As you might know, Windows XP safe mode boot tells you whats going on. When it got
>to Mup.sys, it seems to have stopped responding. None of the lights on the keyboard
>work. Nothing changes on the monitor. BUT, I can hear the clicking of the hard drive,
>and the little hard driver light is on.
|
All messages in this thread [show all]
 |  | re: Mup.sys? Hangs but not? Wha's happening? (Scott: Thu, Apr 22, 2004, 9:34 am) |
| |
| |
Return to the Windows XP Discussion Forum
|
|