re: Re-Enabling ACPI in my bios fixed it for me.
Saturday, May 29, 2004 at 12:16 am Windows XP Annoyances Discussion Forum
Posted by john
(1 messages posted)
i have an amd 2500 asus mb kt7v600 and my problem started right after i upgraded
my bios to v1.06 from v1.05. i have yet to put v1.05 back because my floppy is reading
floppy disks correctly any more either. might just be a coincidence but all my problems
with this mup.sys and floppy drive issue started right after the upgrade. any one
else notice this happening after a bios upgrade?
i still havent found a fix for it yet either, seems like sometimes (about once every
12 hours or so) i can boot into xp normal mode, otherwise safe mode is the only mode
that works
On Wednesday, March 10, 2004 at 8:28 pm, Dave Coyne wrote:
>
>I owe everyone who has taken the time to post a great big "THANKS"! This forum
has
>been invaluable in helping me with my problem. However, I'm still not convinced
>anyone has it right. I don't know the answer yet either and am still in the midst
>of a reinstall to see if it fixes it. Here's the background. Put a new Abit NF7
>mobo and Athlon XP 2500 in my system. Have a 1394 board, Soundblaster audio/game
>card, Radeon 9000 Pro 128 AGP, Adaptec SCSI board. Upon trying to boot after mobo
>install, got the same boot loop hang up after MUP.SYS loaded. I tried all the hardware
>and BIOS tricks here and none helped. I was REALLY frustratred by the fact that
>I couldn't even boot from the XP CD! After hours of blown time, I finally noticed
>that I had knocked the CD cable loose. DOH! IMPORTANT LESSON #1: check connections.
> After fixing this, I booted to the repair console and disabled MUP.SYS. No luck.
> I did c:\TYPE NTBTLOG.TXT and noticed that ACPI was the next thing trying to load.
> I disabled that. Still no change. I ultimately caved and am now trying to reinstall
>XP completely. With 13 minutes to go, I'm now gettign some install error message
>about
>"The procedure entry point Get(UMS could not be located in the dynamic link library
>MSDART.DLL". Must be my lucky week. More news later...
>
>
>
|
All messages in this thread [show all]
 |  |  |  | re: Re-Enabling ACPI in my bios fixed it for me. (john: Sat, May 29, 2004, 12:16 am) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|