re: Question about 'Making Sure the Correct HAL is Installed' Friday, May 20, 2005 at 6:04 pm Windows XP Annoyances Discussion Forum Posted by David (1 messages posted) Okay, so after "enabling this NT/APM Legacy Power Node" (which I do have, windows xp pro sp2), I find that after I choose to shutdown the computer, it restarts itself?! Now what? I also have APM enabled, and APM manage by O.S. in the BIOS enabled, and have tried different combinations of this with no avail! On Friday, December 6, 2002 at 4:12 am, Oxyandy wrote: >When Windows XP won’t powerdown automatically, the APM/NT Legacy Power Node may not >be enabled. To enable this, right-click on the My Computer icon, click Properties >| Hardware | Device Manager | View. Check the box labeled “Show Hidden Devices.” >If it’s available on your computer, there will be a red X on the APM/NT Legacy Node. >Try enabling it and see if this resolves the powerdown problem (Tip from Terri Stratton). >Or, to check the other side of the APM/ACPI coin, open the Power Options applet in >Control Panel. If there is an APM tab, make sure the “Enable Advanced Power Management >Support” box is checked. (MSKB Q313290) > > > > Written in response to: re: Question about 'Making Sure the Correct HAL is Installed' (Oxyandy: Friday, December 6, 2002 at 4:12 am) There are presently no replies to this message. All messages in this thread [show all] Question about 'Making Sure the Correct HAL is Installed' (Shibis: Tue, Oct 22, 2002, 10:46 pm) re: Question about 'Making Sure the Correct HAL is Installed' (Chuck: Sun, Nov 24, 2002, 7:46 pm) re: Question about 'Making Sure the Correct HAL is Installed' (Oxyandy: Fri, Dec 6, 2002, 4:12 am) re: Question about 'Making Sure the Correct HAL is Installed' (David: Fri, May 20, 2005, 6:04 pm) Reply or follow-up to this message Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows XP Discussion Forum