re: New motherboard. Won't boot past mup.sys
Friday, June 17, 2005 at 10:02 am
Windows XP Annoyances Discussion Forum
Posted by chris
(1 messages posted)
So here is the problum with alot of these post they all deal with a diffrent problum
and solution. See i have the same problum with a computer i am working on. The problum
for me isn't hardware related seeing i have removed there hard drive put it in my
comptuer to work on it. I dicided to try using that hard drive as my master and load
there windows with my computer get the same problum hangs at mup.sys and restarts.
Seeing that dosn't happen to my hard drive it's a software problum probaly some kind
of corupt file. I'm working on that part now.. Any idea's not hardware or bios related
fixes that won't help
On Tuesday, June 7, 2005 at 5:48 pm, james tran wrote:
>I work for a company and I was assigned to fix a computer with this problem. I read
>about 15% through the responses and tried them without avail. This was an old system
>(it had win 98 /windows xp dual boot) and based on the responses I read, this was
>probably a power supply problem, having the system crashing at the exact moment
the
>mup.sys/amdagp.sys driver loads.
>
>I replaced the power supply from a 230 to a 430W. Something still seemed to either
>suck the power out or conflict with the computer. I noticed a Netgear wireless PCI
>card attached to the motherboard and I removed it. Presto, windows loads up normally!
>Put the wireless card back in and its back to the same problem.
>
>summary: try unplugging recent hardware , and replace power supply with one that
>uses higher wattage and try unplugging hardware again
|
All messages in this thread [show all]
 |  | | | | | | | | |  | re: New motherboard. Won't boot past mup.sys (chris: Fri, Jun 17, 2005, 10:02 am) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|
