|
|
|
re: Mup.sys? Hangs but not? Wha's happening?
Friday, June 24, 2005 at 2:11 pm Windows XP Annoyances Discussion Forum
Posted by Sean
(1 messages posted)
All, you can disable agp440 and mup.sys as well as many devices that load during
startup. See Microsoft Article http://support.microsoft.com/?kbid=244905
On Saturday, June 19, 2004 at 3:50 am, Ben Chamlet wrote:
>Hi Guys,
>
>I am another poor individual with the same problem. I hoped that the amount of information
>on this thread would sort me out, but to no avail.
>The problem first arose when I found my PC had hung. So I had to reset the box.
It
>has no longer booted since then. Safe mode shows it hanging on MUP.sys. I have
>now stripped it down to the bare bones with only the Geforce 4 4200Ti graphics card
>and a Maxtor DiamondMax Plus 9 attached. Still it doesn't boot. I have tried booting
>from CD and it also hangs when starting Windows. I have tried another HDD with a
>fresh install of XP on and that hangs on the next driver AGP440.sys. All of this
>is proving to be a little strange. I have attached a HDD with Win98 on it and it
>runs like a dream. I have tried to install WinXP and Win2k from CD, but it is not
>playing the game. The only thing that might have some impact is that my XP drives
>are configured as dynamic disks which is a pain as 9x won't recognise them.
>My PC spec is:
>AMD Athlon XP 2200+
>Gigabyte 7VAXP Ultra Mobo
>400w PSU
>Geforce 4 4200 Ti
>512mb DDR Ram PC2700
>Liteon 401 DVD Rewriter
>
|
All messages in this thread [show all]
 |  |  |  |  |  |  | re: Mup.sys? Hangs but not? Wha's happening? (Sean: Fri, Jun 24, 2005, 2:11 pm) |
| |
| |