re: Mup.sys? Hangs but not? Wha's happening?
Thursday, December 22, 2005 at 1:24 pm Windows XP Annoyances Discussion Forum
Posted by Dave
(2 messages posted)
If my sata raid drives are mirrored would I be able to take the drives out and connect
just one of them as a non-raid ordinary drive and be able to read the data on them?
Regards,
Dave
On Wednesday, December 21, 2005 at 5:27 pm, Dave wrote:
>I have been struck by the dreaded Mup.sys problem it seems. For no apparent reason
>my system just stopped working. I tried safe mode and as stated in earlier replies
>it hung after loading MUP.sys. My problem is that I have data on my disk that I
need
>to recover. My system is as follows:
>
>Asus Motherboard A7V8X,
>Memory 1gb ddr,
>Processor AMD XP 2200,
>Sata Raid Drive 2x200gb set up as mirror,
>
>I have reflashed by bios with no effect. Given that an earlier comment said that
>the drives should be ok as the OS has begun to load if I used a drive on one of
my
>ide channels with windows on should I be able to read from my raid array and recover
>my data? I have such a drive and have tried using it. In device manager under drives
>there is my maxtor ide drive and it also lists 'Promise 1x2 Mirror/Raid1 SCSI Disk
>Device'. Under SCSI and RAID Controllers it lists 'Win XP Promise FastTrak 376 (tm)
>Controller', yet when I launch explorer all I see is my floppy drive, my ide drive
>C: and my DVD writer as drive D:. All Drivers and Drives according to device manager
>are working correctly yet I can't access my raid drive. Am I doing something wrong
>or is it a hardware issue?
>
>Hope you can help.
>
>Regards,
>
>Dave.
>
>
>
|
All messages in this thread [show all]
 |  |  |  |  |  | re: Mup.sys? Hangs but not? Wha's happening? (Dave: Thu, Dec 22, 2005, 1:24 pm) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|