re: Dual or Single Channel
Tuesday, April 4, 2006 at 6:14 pm
Windows XP Annoyances Discussion Forum
Posted by sean
(342 messages posted)
Are you sure my board will take ddr 433 or 500. It says it the manual that it only
takes ddr 400. Plus the higher mhz memory is almost twice the price. I have 3*512
of Kingston Value ram (only 2 installed right now). I am going to pick up another
512 of the kingston or may be I can sell it and get the good stuff. I also have a
512 mb stick of Infineon. I wonder if I put that in with the 3 Kingston sticks if
it will run in dual channel mode. It has the exact same timing as the Kingston.
On Tuesday, April 4, 2006 at 2:47 pm, AnchorMan wrote:
>
>I noticed some issues with the mobo memory timings. Just to let you know, I have
>used OCZ without this problem. It does seem Corsairs memory timings may be a little
>slow with the "value" memory. Do yourself a favor and buy non-value with better
timings
>and get a faster module, ie.. DDR433 or DDR500. You can use a faster chip in that
>board and most boards for that matter. The faster chips seem to be priced lower
as
>well because of the popularity. Just a thought.
>
>
>
>
>face="Futura Md BT" color="#800000">AnchorMan
|
All messages in this thread [show all]
 | |  | re: Dual or Single Channel (sean: Tue, Apr 4, 2006, 6:14 pm) |
| |
| |
| |
Return to the Windows XP Discussion Forum
|
|
