|
|
|
hardware problem in winxp
Showing all messages in thread #1025198778
Windows XP Annoyances Discussion Forum
The following are all of the messages in this thread (4 in all), shown in chronological order. Click any message subject to view that message by itself or to view the thread hierarchy.
|
hardware problem in winxp
Thursday, June 27, 2002 at 10:26 am
Posted by aby
(1 messages posted)
this seems to be an interesting one. In A p!!! system which has win98 and winxp,booting
on winxp sometimes shows two problem hardwares(Modem and sound).these hardware always
works in win98
[Reply or follow-up to this message]
| |
re: hardware problem in winxp
Thursday, June 27, 2002 at 10:37 am
Posted by esto
(169 messages posted)
and the question is??? The hardware needs to be on the HCL for XP...so this is normal....yes,
parts of your PIII are antiquated...welcome to technology
On Thursday, June 27, 2002 at 10:26 am, aby wrote:
>this seems to be an interesting one. In A p!!! system which has win98 and winxp,booting
>on winxp sometimes shows two problem hardwares(Modem and sound).these hardware always
>works in win98
[Reply or follow-up to this message]
|
re: hardware problem in winxp
Thursday, June 27, 2002 at 11:14 pm
Posted by Kevin Y
(132 messages posted)
XP and 98 have different drivers,this hardware may not work under XP as alot of hardware
won't mostly older hardware.You might check for drivers on the manufactures website.
On Thursday, June 27, 2002 at 10:26 am, aby wrote:
>this seems to be an interesting one. In A p!!! system which has win98 and winxp,booting
>on winxp sometimes shows two problem hardwares(Modem and sound).these hardware always
>works in win98
[Reply or follow-up to this message]
|
re: hardware problem in winxp
Friday, June 28, 2002 at 1:06 am
Posted by Mark Faulkner
(2 messages posted)
Should be an easy one, sounds like your pc has got plug and play operating system
installed set in the bios...
Sometimes when switching between 2 os's the system doesnt correctly reallocate the
hardware irq's try setting to non plug and play and reset escd configuration data
(or set to pluga and play if the other way around) select reset escd configuration
data to enabled and reboot into XP, then try rebooting into win98 and back again
to xp....
Just to check all is working again..
On Thursday, June 27, 2002 at 10:26 am, aby wrote:
>this seems to be an interesting one. In A p!!! system which has win98 and winxp,booting
>on winxp sometimes shows two problem hardwares(Modem and sound).these hardware always
>works in win98
[Reply or follow-up to this message]
| |
Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread
| |
Return to the Windows XP Discussion Forum
|
|
|
|
