Tip: Run a free scan for common Windows errors ad

re: HP PrecisionScan LT Setup Startup Message Sunday, August 3, 2003 at 12:15 pm Posted by Willi Collinsworth (1 messages posted) HP Scanjet - Uninstall the Precisionscan, Pro, LT, or LTX Software in Safe Mode Step 1: Disconnect the scanner from the computer system Shut down the computer system. Disconnect the scanner's power cable. Disconnect the interface cable (USB, parallel, or SCSI). Turn on the computer system. Step 2: Uninstall the software Click Start, then Control Panel. The Control Panel window will open. Double-click Add/Remove Programs. The Add/Remove Programs Properties window will open. Click Precisionscan, Pro, LT, or LTX to highlight it, then click Change/Remove. The UninstallShield Wizard window will open. Click Yes to start the UninstallShield Wizard. Follow the screen prompts. Click Yes to All on the shared files warning screen. Step 3: Delete all remaining installation files Open the file search window. In Windows XP, click Start, Search, then For Files or Folders. The Search Results window will open. In the Named field type: Scanjet* In the Look in field, select (C:). Make sure there is a check mark in the Include subfolders box. Click Find now or Search now to start the search. Highlight and delete all files found. Repeating Step 3, items 2-4, find and delete the following files: hpsc* hpsj* Close the file search window to return to the Desktop. On the Desktop, double-click the Recycle Bin icon. Click File, then click Empty Recycle Bin. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Monday, October 27, 2003 at 11:55 am Posted by John Tween (1 messages posted) I have followed these steps, but the message still occurs, and there is one "dll" file that i cannot delete in the search screen, how do i erradicate this problem? On Sunday, August 3, 2003 at 12:15 pm, Willi Collinsworth wrote: >HP Scanjet - Uninstall the Precisionscan, Pro, LT, or LTX Software in Safe Mode > >Step 1: Disconnect the scanner from the computer system >Shut down the computer system. >Disconnect the scanner's power cable. >Disconnect the interface cable (USB, parallel, or SCSI). >Turn on the computer system. > >Step 2: Uninstall the software >Click Start, then Control Panel. The Control Panel window will open. >Double-click Add/Remove Programs. The Add/Remove Programs Properties window will >open. >Click Precisionscan, Pro, LT, or LTX to highlight it, then click Change/Remove. The >UninstallShield Wizard window will open. >Click Yes to start the UninstallShield Wizard. >Follow the screen prompts. Click Yes to All on the shared files warning screen. > >Step 3: Delete all remaining installation files >Open the file search window. >In Windows XP, click Start, Search, then For Files or Folders. The Search Results >window will open. >In the Named field type: Scanjet* >In the Look in field, select (C:). Make sure there is a check mark in the Include >subfolders box. >Click Find now or Search now to start the search. >Highlight and delete all files found. >Repeating Step 3, items 2-4, find and delete the following files: >hpsc* >hpsj* >Close the file search window to return to the Desktop. [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Saturday, December 27, 2003 at 1:46 am Posted by Richard Evans (1 messages posted) HP have fix instructions ...... http://h20015.www2.hp.com/hub_search/document.jhtml?lc=en&docName=c00005381&cc=us On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Tuesday, January 6, 2004 at 9:48 am Posted by Jackie (1 messages posted) I have also followed these steps to the letter and still receive the message and I also cannot delete the .dll file. It is very annoying On Monday, October 27, 2003 at 11:55 am, John Tween wrote: >I have followed these steps, but the message still occurs, and there is one "dll" >file that i cannot delete in the search screen, how do i erradicate this problem? > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Wednesday, January 21, 2004 at 9:57 am Posted by Jeff (1 messages posted) ARE you still having problems? If so, you must end the process of the program before you try to delete it. Do this by Control-alt-delete , then select process and end process for the hpupdate progaram. I tried all of the steps given to you without much luck until I ran on to this extra step. hope this helps. On Tuesday, January 6, 2004 at 9:48 am, Jackie wrote: > >I have also followed these steps to the letter and still receive the message and >I also cannot delete the .dll file. It is very annoying > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Wednesday, February 11, 2004 at 5:09 pm Posted by Dave (1 messages posted) I managed to get this problem and none of the tips worked... BUT I managed to remove this annoying message by using REGCLEANER 4.3 Just go into start up in this program and check the hp...line and remove it...When you reboot ITS gone.. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, May 21, 2004 at 8:38 am Posted by Laurie (1 messages posted) These are EXCELLENT directions, but first just add in the suggestion made by the other person to stop the process: "you must end the process of the program before you try to delete it. Do this by Control-alt-delete , then select process and end process for the hpupdate program. " You then can delete everything you need to and you shouldn't see the start up message again. Thanks very much for the detailed directions! On Sunday, August 3, 2003 at 12:15 pm, Willi Collinsworth wrote: >HP Scanjet - Uninstall the Precisionscan, Pro, LT, or LTX Software in Safe Mode > >Step 1: Disconnect the scanner from the computer system >Shut down the computer system. >Disconnect the scanner's power cable. >Disconnect the interface cable (USB, parallel, or SCSI). >Turn on the computer system. > >Step 2: Uninstall the software >Click Start, then Control Panel. The Control Panel window will open. >Double-click Add/Remove Programs. The Add/Remove Programs Properties window will >open. >Click Precisionscan, Pro, LT, or LTX to highlight it, then click Change/Remove. The >UninstallShield Wizard window will open. >Click Yes to start the UninstallShield Wizard. >Follow the screen prompts. Click Yes to All on the shared files warning screen. > >Step 3: Delete all remaining installation files >Open the file search window. >In Windows XP, click Start, Search, then For Files or Folders. The Search Results >window will open. >In the Named field type: Scanjet* >In the Look in field, select (C:). Make sure there is a check mark in the Include >subfolders box. >Click Find now or Search now to start the search. >Highlight and delete all files found. >Repeating Step 3, items 2-4, find and delete the following files: >hpsc* >hpsj* >Close the file search window to return to the Desktop. [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Sunday, June 6, 2004 at 7:57 pm Posted by Gene (2 messages posted) I've followed all of the steps outlined including ending the process before deleting and I'm still left with the same undeletable file, hpsjmcro.dll, within hpsj*. Any more ideas would be most welcome. Thank you. On Wednesday, January 21, 2004 at 9:57 am, Jeff wrote: >ARE you still having problems? If so, you must end the process of the program before >you try to delete it. Do this by Control-alt-delete , then select process and end >process for the hpupdate progaram. I tried all of the steps given to you without >much luck until I ran on to this extra step. hope this helps. > > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Wednesday, June 9, 2004 at 8:16 am Posted by Rob Jaspers (1 messages posted) Uninstall HP scanjet software gives a message: Kan registratiewaarde 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Update 3300C' niet verwijderen. So delete manual in the registry: 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Update 3300C' . The message will disappear. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Sunday, July 4, 2004 at 8:22 pm Posted by Gene (2 messages posted) Rob, Today I finally got frustrated enough to go into the register for the first time. Your recommendation seems to have worked fine. The HP scanjet message is finally gone. Thanks much. Gene On Wednesday, June 9, 2004 at 8:16 am, Rob Jaspers wrote: >Uninstall HP scanjet software gives a message: Kan registratiewaarde 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Update >3300C' niet verwijderen. > >So delete manual in the registry: >'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Update 3300C' > >. > >The message will disappear. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Sunday, August 22, 2004 at 9:23 pm Posted by Joseph Wysocki (1 messages posted) This programupdatesyour HP scanning software. You may see a message about digital Signature not found. You must click yes for updato install On Sunday, August 3, 2003 at 12:15 pm, Willi Collinsworth wrote: >HP Scanjet - Uninstall the Precisionscan, Pro, LT, or LTX Software in Safe Mode > >Step 1: Disconnect the scanner from the computer system >Shut down the computer system. >Disconnect the scanner's power cable. >Disconnect the interface cable (USB, parallel, or SCSI). >Turn on the computer system. > >Step 2: Uninstall the software >Click Start, then Control Panel. The Control Panel window will open. >Double-click Add/Remove Programs. The Add/Remove Programs Properties window will >open. >Click Precisionscan, Pro, LT, or LTX to highlight it, then click Change/Remove. The >UninstallShield Wizard window will open. >Click Yes to start the UninstallShield Wizard. >Follow the screen prompts. Click Yes to All on the shared files warning screen. > >Step 3: Delete all remaining installation files >Open the file search window. >In Windows XP, click Start, Search, then For Files or Folders. The Search Results >window will open. >In the Named field type: Scanjet* >In the Look in field, select (C:). Make sure there is a check mark in the Include >subfolders box. >Click Find now or Search now to start the search. >Highlight and delete all files found. >Repeating Step 3, items 2-4, find and delete the following files: >hpsc* >hpsj* >Close the file search window to return to the Desktop. [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Saturday, September 11, 2004 at 9:42 pm Posted by sue (1 messages posted) i followed the instruction to delet the hp precision scan ltx setup annoyance it worked!!! [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Tuesday, February 15, 2005 at 4:01 pm Posted by Edgar Bryant (1 messages posted) I installed Xp on my computer and I had the same problem. My scanner would not install on XP with my old software. To be able to reinstall my HP Scanner " HP 4200c " I had to order HP precision Scan LT software/Driver for the ScanJet 4200c Series, Version 2.0.3 that will install with XP. I installed the full version,which had HP System Diagnostic on it. It helped me to get rid of this annoying problem. Check out HP website, and you can get this Software off of the Internet. It helped me and I hope that this will help some one else. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LT Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Thursday, April 14, 2005 at 8:54 pm Posted by Klaus Collinsworth (1 messages posted) I find it is best to replace your desktop and get a quality laptop. On Sunday, August 3, 2003 at 12:15 pm, Willi Collinsworth wrote: >HP Scanjet - Uninstall the Precisionscan, Pro, LT, or LTX Software in Safe Mode > >Step 1: Disconnect the scanner from the computer system >Shut down the computer system. >Disconnect the scanner's power cable. >Disconnect the interface cable (USB, parallel, or SCSI). >Turn on the computer system. > >Step 2: Uninstall the software >Click Start, then Control Panel. The Control Panel window will open. >Double-click Add/Remove Programs. The Add/Remove Programs Properties window will >open. >Click Precisionscan, Pro, LT, or LTX to highlight it, then click Change/Remove. The >UninstallShield Wizard window will open. >Click Yes to start the UninstallShield Wizard. >Follow the screen prompts. Click Yes to All on the shared files warning screen. > >Step 3: Delete all remaining installation files >Open the file search window. >In Windows XP, click Start, Search, then For Files or Folders. The Search Results >window will open. >In the Named field type: Scanjet* >In the Look in field, select (C:). Make sure there is a check mark in the Include >subfolders box. >Click Find now or Search now to start the search. >Highlight and delete all files found. >Repeating Step 3, items 2-4, find and delete the following files: >hpsc* >hpsj* >Close the file search window to return to the Desktop. [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, July 15, 2005 at 9:11 am Posted by dairmuid (1 messages posted) (http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00005381&dlc=en〈=en) Clicking on the above link only takes you to HP's main website, so here is what the website tells you to do: Symptom A "Digital signature not found" message opens every time the computer is started in Windows XP. This message opens as the Windows Desktop loads. Solutionback to top of page Remove the entries for hpupdate.exe and update from the startup menu and then delete the hpupdate.exe file. These entries may appear in the following format: * C:\sj655\hpupdate.exe * C:\Program files\scanjet\Precision Scan LT\update.exe Step 1: Remove the entries from the Start Menu 1. Click Start, then Run. The Run window will open. 2. In the Open box, type msconfig and click OK. The System Configuration Utility will open. 3. Click the Startup tab and remove the check marks next to the hpupdate.exe or update.exe entries, if present. 4. Click OK and then close the System Configuration Utility window. Step 2: Delete the file hpupdate.exe 1. Right-click Start and then click Explore. Windows Explorer will open. 2. Click Tools, then Folder Options. The Folders options window will open. 3. Click the View tab, select Show hidden files and folders, and then click OK. 4. Click Start , Search, then Files or folders. The Find files and folders window will open. 5. In the Named box, type hpupdate.exe. In the Look in box, use the arrow to open the drop-down menu and then select [C:]. Make sure there is a check mark in the Include subfolders checkbox. 6. Click Search or Find now. A list of the files found will display. 7. Highlight all of the entries found for the file hpupdate.exe. Click Edit, and then Delete. Click OK to delete the file(s). 8. Restart the computer system. The message window should not open again. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Thursday, September 15, 2005 at 6:48 pm Posted by biff j. (1 messages posted) any one have a simple solution to this? On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, February 3, 2006 at 2:22 pm Posted by yahui (3 messages posted) I get rid of HP PrecisionScan LT Setup Startup Message but another message pop up saying: no digital signiture. Does anyone know how to get rid of it? On Sunday, August 3, 2003 at 12:15 pm, Willi Collinsworth wrote: >HP Scanjet - Uninstall the Precisionscan, Pro, LT, or LTX Software in Safe Mode > >Step 1: Disconnect the scanner from the computer system >Shut down the computer system. >Disconnect the scanner's power cable. >Disconnect the interface cable (USB, parallel, or SCSI). >Turn on the computer system. > >Step 2: Uninstall the software >Click Start, then Control Panel. The Control Panel window will open. >Double-click Add/Remove Programs. The Add/Remove Programs Properties window will >open. >Click Precisionscan, Pro, LT, or LTX to highlight it, then click Change/Remove. The >UninstallShield Wizard window will open. >Click Yes to start the UninstallShield Wizard. >Follow the screen prompts. Click Yes to All on the shared files warning screen. > >Step 3: Delete all remaining installation files >Open the file search window. >In Windows XP, click Start, Search, then For Files or Folders. The Search Results >window will open. >In the Named field type: Scanjet* >In the Look in field, select (C:). Make sure there is a check mark in the Include >subfolders box. >Click Find now or Search now to start the search. >Highlight and delete all files found. >Repeating Step 3, items 2-4, find and delete the following files: >hpsc* >hpsj* >Close the file search window to return to the Desktop. [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Saturday, March 4, 2006 at 9:59 am Posted by Philippe (1 messages posted) I simply put back the system at a date prior to the dowloding of the driver sotware. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Sunday, March 19, 2006 at 2:29 pm Posted by Steve (1 messages posted) On Sunday, March 19 2006 at 8:51 am, Steven Thomas wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly. How can I stop this message? > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Monday, August 21, 2006 at 12:59 am Posted by Trevor Sykes (1 messages posted) >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I Tried to install a driver for Scanjet 3000 without success. Above message pops up repeatedly. [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Tuesday, August 22, 2006 at 12:51 pm Posted by Mihail Radu (1 messages posted) I had also experienced the annoyance of the Startup message "HP PrecisionScan LT Setup". After a series of failed attempts to get rid of it, I finally tried the following scheme: I opened the System Configuration Utility, I chose Startup and I unchecked these two items: 1) hpupdate (Command: C:\sj650\hpupdate.exe 3300C+) and 2) NEWDOT~2 (Command: rundll.32 C:\PROGRA~1\NEWDOT~1\NEWDOT~2DLL,NewDotNetStartup -s). I clicked Apply and I restarted my computer. Pay attention! At this first restart and only for once, I received a "warning-prompting" message to undo my changes by going back to the System Configuration Utility and clicking Standard configuration. Ignore it and get rid of it clicking 'Don't show'. It works 100%!!!! Try it and you'll see!!! [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Wednesday, November 1, 2006 at 2:26 am Posted by sherryporzelt (1 messages posted) I have tried all the directions to remove the popup message but still get the popup. Any other suggestions; this is very annoying. On Sunday, August 22, 2004 at 9:23 pm, Joseph Wysocki wrote: >This programupdatesyour HP scanning software. You may see a message about digital >Signature not found. You must click yes for updato install > > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, November 10, 2006 at 9:21 am Posted by Patricia Doan (1 messages posted) I followed the instructions as printed in this message. I am using Windows XP. However there are 3 files that I cannot delete and I am still receiving the message at startup. hpsjmcro.dll in 3 dfferent files, 13 KB. Any suggestions for getting rid of these files? On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Sunday, January 7, 2007 at 10:11 pm Posted by Doris Schmidt (2 messages posted) >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. I used to have an HP scanner but now have a new computer and an Epson scanner. Please get rid of that message I get everytime I get on the Internet. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Thursday, April 5, 2007 at 10:37 am Posted by Doris Schmidt (2 messages posted) I still haven't gotten a message back from you on how to get rid of this annoyance. I'm so tired of seeing this pop up every time I turn on my computer. Please get rid of it for me. [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Tuesday, July 17, 2007 at 9:32 am Posted by barry southwic (1 messages posted) How do I get rid of this anoying message? On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, January 18, 2008 at 3:45 pm Posted by John Rohner (1 messages posted) Jan 18 th, 2008. I cannot get rid of HP Precision Scan LTS, Please tell me how. Thank You On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, November 14, 2008 at 8:07 am Posted by Michelle Preston (1 messages posted) Friday, november 14/2008 Michelle preston. I have been having the same problem as well! Can some one tell me how to get rid of this annoying message, PLEASE! thank you. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, November 14, 2008 at 8:34 am Posted by MartinM (5115 messages posted) You are looking in the wrong place - this issue is nothing to do with XP, and everything to do with HP's invasive software. Have a look in the HP support forums, and you will find stuff like this [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Friday, March 20, 2009 at 7:33 am Posted by s (1 messages posted) I have this software its for pre-XP windows. Firstly you NEED to go into services and disable the WIA service to use this software at all, it conflicts with windows image aquisition service. then right click on the hpprsclt.exe file and change run in compatibility mode to w98. Then unplug your usb cable and reinsert, start software and it works ok. certainly with my scanjet 3300c On Friday, November 14, 2008 at 8:34 am, MartinM wrote: > >You are looking in the wrong place - this issue is nothing to do with XP, and everything >to do with HP's invasive software. > >Have a look in the HP support forums, and you will find stuff like >href="http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1226679953963+28353475&threadId=885350">this > [Reply or follow-up to this message] re: HP PrecisionScan LT Setup Startup Message Saturday, July 18, 2009 at 3:55 am Posted by Chris Morris (1 messages posted) Symptom A "Digital signature not found" message opens every time the computer is started in Windows XP. This message opens as the Windows Desktop loads. Solution Remove the entries for hpupdate.exe and update from the startup menu and then delete the hpupdate.exe file. These entries may appear in the following format: * C:\sj655\hpupdate.exe * C:\Program files\scanjet\Precision Scan LT\update.exe Step 1: Remove the entries from the Start Menu 1. Click Start, then Run. The Run window will open. 2. In the Open box, type msconfig and click OK. The System Configuration Utility window will open. 3. Click the Startup tab and remove the check marks next to all the HP files. 4. Click Apply, then OK, close the System Configuration Utility window, then click Close without restart. Step 2: Delete the file hpupdate.exe 1. Right-click Start and then click Explore. Windows Explorer will open. 2. Click Tools, then Folder Options. The Folders Options window will open. 3. Click the View tab, select Show hidden files and folders, and then click OK. 4. Click Start, Search, then All Files or folders. The Find files and folders window will open. 5. In the Name box, type hpupdate.exe. In the Look in box, use the arrow to open the drop-down menu and then select [C:]. Make sure there is a check mark in the Include subfolders checkbox. 6. Click Search or Find now. A list of the files found will display. 7. Highlight all of the entries found for the file hpupdate.exe. Click Edit, and then Delete. Click OK to delete the file(s). 8. Restart the computer system. The message window should not open again. On Friday, June 20, 2003 at 8:51 am, David Ash wrote: >Has anybody else experienced this error message at Windows XP startup and been successful >in getting rid of it? "HP PrecisionScan LY Startup. This program updates your HP >scanning software. You may see a message about 'Digital Signature Not Found'. You >must click 'Yes' for the update to install correctly." I do not own an HP scanner >and have not knowingly installed a driver for it. > > [Reply or follow-up to this message] Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread Search this forum Start a new thread on a different subject Report abuse of the forum Return to the Windows XP Discussion Forum