|
|
|
Blue screen at start up after installing SP2
Showing all messages in thread #1093622072
Windows XP Annoyances Discussion Forum
The following are all of the messages in this thread (6 in all), shown in chronological order. Click any message subject to view that message by itself or to view the thread hierarchy.
|
Blue screen at start up after installing SP2
Friday, August 27, 2004 at 8:54 am
Posted by Mike Smith
(8 messages posted)
i am getting a Blue screen at start up that is saying:
STOP: C0000135 {Unable to Locate Component}
This application has failed to start because winsrv was not found. Re-installing
the application may fix this problem.
Does any on know if this is just a problem with the installation of SP2 or just a
problem with SP2 in general? And is there a fix for it?
[Reply or follow-up to this message]
| |
re: Blue screen at start up after installing SP2
Friday, August 27, 2004 at 9:51 am
Posted by Lou
(568 messages posted)
SP2 is turning out to be quite a problematic update. Anyhow try this:
Boot your computer off of your Windows XP cd. Go into the repair option. When you
get to the command prompt type C:\chkdsk /r
This will run the Checkdisk Repair Utility. Finish it out then reboot. I have
heard this will fix the problem.
On Friday, August 27, 2004 at 8:54 am, Mike Smith wrote:
>i am getting a Blue screen at start up that is saying:
>
>STOP: C0000135 {Unable to Locate Component}
>This application has failed to start because winsrv was not found. Re-installing
>the application may fix this problem.
>
>Does any on know if this is just a problem with the installation of SP2 or just
a
>problem with SP2 in general? And is there a fix for it?
[Reply or follow-up to this message]
|
re: Blue screen at start up after installing SP2
Friday, August 27, 2004 at 10:18 am
Posted by phantom
(5587 messages posted)
You might want to try slipstreaming.
http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp
On Friday, August 27, 2004 at 8:54 am, Mike Smith wrote:
>i am getting a Blue screen at start up that is saying:
>
>STOP: C0000135 {Unable to Locate Component}
>This application has failed to start because winsrv was not found. Re-installing
>the application may fix this problem.
>
>Does any on know if this is just a problem with the installation of SP2 or just
a
>problem with SP2 in general? And is there a fix for it?
[Reply or follow-up to this message]
|
Blue screen fixed
Friday, August 27, 2004 at 10:46 am
Posted by Mike Smith
(8 messages posted)
The problem was solved by the inserting my WinXP disc. I didn't try slipstreaming.
Thanks All
[Reply or follow-up to this message]
|
re: Blue screen fixed
Thursday, October 7, 2004 at 12:27 am
Posted by hd515b
(1 messages posted)
I performed the 'chkdsk /r' command as well, but after I rebooted, I still get the
same error msg as when I started. I am unclear as to what is going on. Any further
tip is appreciated.
--hd
On Friday, August 27, 2004 at 10:46 am, Mike Smith wrote:
>The problem was solved by the inserting my WinXP disc. I didn't try slipstreaming.
>
>Thanks All
[Reply or follow-up to this message]
|
re: Blue screen fixed
Saturday, April 16, 2005 at 1:50 pm
Posted by Jewel Kinder
(1 messages posted)
I am getting a the same error message when I boot up after installing sp2, but I
don't have the xp startup cd so I made a boot up disk from another system, but I
don't see any of the drives can't get to my harddrive or cd rom..PLEASE HELP!
On Thursday, October 7, 2004 at 12:27 am, hd515b wrote:
>I performed the 'chkdsk /r' command as well, but after I rebooted, I still get the
>same error msg as when I started. I am unclear as to what is going on. Any further
>tip is appreciated.
>
>--hd
>
>
[Reply or follow-up to this message]
| |
Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread
| |
Return to the Windows XP Discussion Forum
|
|
|
|
