|
|
|
Missing Safely Remove Hardware Icon
Showing all messages in thread #1216969250 Windows XP Annoyances Discussion Forum
The following are all of the messages in this thread (11 in all), shown in chronological order. Click any message subject to view that message by itself or to view the thread hierarchy.
|
Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 12:00 am Posted by Clive Richardson
(7 messages posted)
I've recently installed an Epson All-In-One printer/scanner (USB connection), and
after restarting Windows the Safely Remove Hardware icon has disappeared from the
System Tray. I've tried Customize in the Taskbar - Properties but no matter what
I do there, it won't reappear. When I run sys32/rundll32 and stop one of the devices
the icon reappears in the System Tray. Is this an XP bug?
[Reply or follow-up to this message]
| |
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 7:41 am Posted by MattWD
(157 messages posted)
You say that the icon has disappeared so it used to be there... what hardware was
it associated with originally? And is that hardware still functioning properly without
the icon displaying?
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 8:48 am Posted by Clive Richardson
(7 messages posted)
The "Safely Remove Hardware" icon is normally associated with hot-swappable serial
devices such as USB drives. The HDD is also listed as it is a SATA drive. All the
associated devices work properly despite the absence of the system tray icon.
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 8:54 am Posted by MattWD
(157 messages posted)
It sounds to me that it's just some kind of glitch in XP as you had suggested in
your original post. If all appears to be functioning properly I wouldn't worry about
it. But that's just me, I'm sure someone else may chime in. Good luck!
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 8:55 am Posted by bob wells
(1636 messages posted)
Clive,
Plug in a hot swappable device & see if the Icon returns. It's possible the Icon
is just hidden due to lack of use.
On my system the Icon only appears when a removeable device has been plugged into
the USB port.
__________________________________________________________
There's nothing to learn from someone who already agrees with you.
On Friday, July 25, 2008 at 8:48 am, Clive Richardson wrote:
>The "Safely Remove Hardware" icon is normally associated with hot-swappable serial
>devices such as USB drives. The HDD is also listed as it is a SATA drive. All the
>associated devices work properly despite the absence of the system tray icon.
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 9:12 am Posted by Clive Richardson
(7 messages posted)
The SATA HDD drive of course is permanently plugged in, and I use USB drives regularly.
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 9:21 am Posted by Clive Richardson
(7 messages posted)
Yes, thanks for your comments. MattWD
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 12:12 pm Posted by bob wells
(1636 messages posted)
Clive,
Chek out this link.
http://www.kellys-korner-xp.com/taskbarplus!.htm
Has a fix for Notification area of Taskbar.
BW
__________________________________________________________
There's nothing to learn from someone who already agrees with you.
On Friday, July 25, 2008 at 9:12 am, Clive Richardson wrote:
>The SATA HDD drive of course is permanently plugged in, and I use USB drives regularly
BW
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 12:35 pm Posted by Clive Richardson
(7 messages posted)
Thanks Bob for that link, I will have a look at it, although today I installed SP3
and so far it seems to have resolved the issue. The icon is back.
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 12:39 pm Posted by Spexx
(2229 messages posted)
I have always understood that the icon only appears when a USB (or other removeable)
storage device is plugged in. I have a Bluetooth device and a Wireless networking
device both plugged in to USB ports and the icon does not appear. As soon as I plug
a USB flash drive in, the icon appears. If I remove it safely (using the icon) then
the icon goes away. In fact if I just rip the flash drive out, the icon goes away.
This is normal, expected behaviour. Cheers. Spexx.
[Reply or follow-up to this message]
|
re: Missing Safely Remove Hardware Icon
Friday, July 25, 2008 at 12:49 pm Posted by bob wells
(1636 messages posted)
Clive,
I'm pleased to hear you have it back.
I was kind of hoping to hear back if the Kelly' Korner tool worked. The Icon is not
specifically mentioned and I can't try it cause I'm not on XP Machine.
There'll be another time.
BW
__________________________________________________________
There's nothing to learn from someone who already agrees with you.
On Friday, July 25, 2008 at 12:35 pm, Clive Richardson wrote:
>Thanks Bob for that link, I will have a look at it, although today I installed SP3
>and so far it seems to have resolved the issue. The icon is back.
[Reply or follow-up to this message]
| |
| |
Tip: Use one of the [Reply or follow-up to this message] links above to add a message to this thread
| |
Return to the Windows XP Discussion Forum
|
|
|
|